Every tracked unit's page has a Service history tab: each service visit on that unit, when it happened, the site, the driver, the gallons pumped, and a link to the service report.
Open it
Go to Inventory and open a unit (for example #1019).Click the Service history tab.Scanning the unit's tag opens the same page.
What each row shows
| Column | Meaning |
|---|
| Date | When the visit was completed, in your company's time zone. |
| Service | Service, Cleaning, Maintenance or Swap, with the job number. |
| Site | The address that was serviced. |
| Driver | Who was assigned to the job. |
| Gallons | Gallons pumped, when the driver recorded them. |
| How we know | See below. |
| Report | Opens the service report PDF. |
"How we know"
PortaPro is careful about what it claims:
Serviced at site: a service job was completed at the site while this unit was placed there on the map. If a site has ten units, all ten show the visit; it does not claim the driver opened this exact unit.Recorded on this unit: the driver scanned this unit's tag during the stop. This is the one that says the driver handled this exact unit.Booked on this unit: the job itself was booked with this specific unit.Swapped: this unit was part of a swap job.At this site while placed: an older visit, from before PortaPro started recording visits per unit (October 2026), rebuilt from when the unit was delivered to and picked up from the site.Drivers: scan the units you service
On a service stop in the driver app, Units serviced sits above Proof of Service.
Tap Scan a unit and scan the printed tag on the unit (or type its number).Repeat with Scan another unit for each unit you service.Complete the job as usual.You don't have to scan every unit. A stop with five units and one scan records
that one unit as "Recorded on this unit"; the other four still show the visit
as "Serviced at site". The service report's Units Serviced number starts at
the site's rate card count, and the scanned numbers print on the report as
Units scanned. A damage flag is filed on the scanned unit the driver picks
under Which unit?.
Each scanned unit's history then shows the visit as Recorded on this unit. Units at the site you didn't scan still show Serviced at site, so nothing is lost if a tag is missing or scratched.
No signal? The scan is saved on the phone and records, with the time you scanned, when the connection returns.Scanned the wrong unit? Tap the × next to it before you complete the job.If the map doesn't show that unit at this site, the scan still records and says "Not on the map at this site", so the office knows the pin needs fixing.Scanning is optional. A stop with no scans completes exactly as before.Why a visit might be missing
The unit is not placed on a map pin at the site. Place it from the site's GPS Pins tab, or have the driver drop it from the app at delivery.The job was not a service visit (deliveries and pickups do not show here).The job is not completed yet.Related articles
Individual Unit TrackingGPS PinsProof of Service: Stamped Photos and the Service Completed Notice