This page follows one day through PortaPro, from the jobs arriving to the last stop being closed, and says which screen each step happens on. Each step links to its own article.
Where things are
Dispatch shows one day of jobs three ways: Schedule (what goes out and what comes back, or the week by driver), Board (hand the day out to drivers) and Map (the same jobs on a map). All three share the same day and the same filters.Routes has three tabs: Plan a day (put each driver's stops in order and send them to the phones), Week (every driver's week) and Areas (your service areas).Yards is where equipment is kept. A yard with Trucks start and end here turned on is where routes start and end. Dump sites are on Yards too.Fleet holds trucks, inspections and maintenance. Services holds what you sell, your report forms and Deployed units (every site with units out).Names changed in November 2026. Search still finds the old ones: Jobs & Dispatch (now Dispatch), Route Plan (Routes), Service Board (Deployed units), Facilities (Yards), Disposal Sites (Dump sites).
1. The day's jobs arrive
Recurring service makes its own jobs. Every night PortaPro creates the service visits your rate cards call for. You do not enter them. See Recurring Service Jobs.New work starts from New job (or + → Job). It asks what you are setting up: a short-term rental and a one-time service are booked on one screen, an extra service or a pickup at a site starts from that site, and units that stay go on the rate card. See Starting new work.Customer requests (a pickup, an extra unit, a service call) wait in Inbox → Requests. Booking one opens the screen for that work with the customer, site and day filled in.2. Hand out the day: Dispatch → Board
Open Dispatch and choose Board. Jobs with no driver are in Unassigned on the left. Each driver has a column.Drag a job onto a driver. To move several, tick their checkboxes, pick a driver in Assign to… and press Assign selected.Every move shows Undo.Board, Routes and Timeline are three layouts of the same jobs. Full screen and Open in New Tab put the Board on a second monitor. See Schedule, Board and Deployed units.
You do not have to plan routes to assign jobs. A driver with jobs and no route simply sees them in time order.
3. Put the stops in order: Routes → Plan a day
Open Routes → Plan a day on the same day (the Plan a day link on the Board goes there).Press Plan day. PortaPro orders each driver's stops, respects access windows, adds a dump stop for a pump truck that would fill up (when tank sizes are entered and capacity routing is on) and estimates each arrival.Check the result, then press Push to drivers. The route appears on each driver's phone.Where a truck starts and ends: its own Route start and end on the truck in Fleet, else the Start picked on this screen, else its home yard, else your default yard.
After the day is planned and before it is sent, you can still change a driver's stop order on the Board by dragging inside their lane. Once it is sent, changes are made in Routes. Mid-day, Re-plan from where trucks are re-orders what is left. See Planning and optimizing routes.
4. The driver's day
In the driver app, Today lists the driver's stops (To do, Done, All) as a list, a map or a timeline. One button walks each stop:
I'm on my way. If on-the-way texts are turned on and the stop is on a sent route, the customer is texted.I've arrived. The job starts, and the time and location are saved.Complete stop. The driver fills in the report form if the service has one, adds photos or a signature if asked, and finishes.Problem reports a stop that could not be done (locked gate, blocked unit, customer refused) and can call dispatch.
Pre-trip and post-trip truck inspections ask only about what that truck has. Each company turns them on or off in Settings → Jobs → Vehicle inspections. The app works with no signal and sends everything when signal returns.
5. Watch the day
Dispatch → Map shows each driver's progress and next stop. Click a job to reassign or reschedule it.Click any job to open it. It opens with a summary and one main button, then Work, Proof & paperwork, Money and History.Needs attention on Dispatch lists missed stops: a job whose day passed while still open, or one a driver reported a problem on. Reschedule suggests the best day and driver. Dismiss closes it with a reason. See Missed Stops and Rescheduling.Two things you can turn on:
An end-of-day missed-stop report by email, text or push, and moving stops nobody reported on to the next working day: Settings → Routing → When a stop is missed.A "service completed" message to the customer, with photos and signature, for each stop or as one end-of-day summary: Settings → Jobs. See Proof of service and the completion notice.Before your first live day
Yards: your yard is added with Trucks start and end here on.Fleet: each truck has its working hours, and its tank size if it pumps. Drivers are paired with trucks.Team: drivers are invited. An office person who also drives has Also drives or works in the field turned on.Settings → Jobs: vehicle inspections on or off, and the completion notice.Settings → Phone & texting: on-the-way and day-before texts (these need your texting number).Settings → Routing: the missed-stop report and its time.Related articles
Dispatch OverviewSchedule, Board and Deployed unitsThe Dispatch MapPlanning and optimizing routesThe week board and handing off a driver's dayMissed Stops and Rescheduling