Once trackers report, their positions show up in several places. This article
covers the trucks; for tagged equipment see Unit Trackers.
Trucks on the dispatch map
On the Dispatch map, Vehicles (shortcut V) starts on. If you tag
units, open the layer controls and turn on Tracked Units (shortcut
U), which starts off.
tracker is healthy, amber when it is overdue and grey when it is offline.
while moving, the battery if the tracker reports one, and the source:
Hardware GPS, Samsara, Geotab, Motive, Verizon Connect or Driver app.
View vehicle → opens the truck.
A truck's Location tab
Open the truck in Fleet and choose the Location tab.
battery.
day's route, every trip (start and end, distance, time, idle time and top
speed) and the stops it worked. Tap a trip to draw just that trip.
it.
tapped (no tracker visit)", "Completed (no GPS)" or "Not done yet".
A trip starts when the truck moves and ends after it has been stopped for ten
minutes. Idle time counts stretches of three minutes or more with the engine
on and the truck not moving. History goes back 90 days.
If the truck has no tracker yet, the tab offers Track this truck instead
(see PortaPro Trackers).
Proof of service on jobs
When the truck assigned to a job (directly, or through the driver's truck for
that day) crosses into the job's service address on the scheduled day,
PortaPro stamps the arrival time, and the departure when it leaves. The
job's Proof of Service card then shows:
GPS verified on site · 9:14–9:26 AM (12 min)
with "Recorded by the assigned vehicle's tracker entering and leaving the
service address." It also shows what the driver tapped ("Driver tapped
Arrived … Complete …") so you can compare. See on the truck's trail opens
the truck's Location tab on that day.
This comes from the truck's tracker, not the driver's phone, so it works even
if the driver forgot to tap. The same "GPS verified on site" line prints on
the invoice PDF and the service report PDF for that job.
Weekly report
Settings → GPS Tracking → More → Weekly report (the fold at the foot of
the page) shows, per truck, trips, miles,
driving time, idle time and days active, and per tagged unit its site,
delivery date and days on site. Step between weeks with the arrows and click
Download CSV.
Customer arrival texts and the live map
When a truck's tracker comes within about five miles of today's next job,
PortaPro sends that customer the on-the-way text, once per job. It only does
this when your on-the-way texts are set to send automatically, and it honors
opt-outs. A tracker reports whether or not the driver's app is open, so these
texts are more dependable than ones driven by the phone. The customer's
tracking link also shows a live map of the driver's approach.
In the driver app
Tracked units ("Where each tagged unit actually is"), so a driver sent
to pick up a unit sees where it really is.
customer when the phone is within about 150 m of an open stop.
from the truck's tracker when no starting mileage was entered, so the
driver confirms a number instead of typing one.