Watch: One stop per site per day
0:43A stop is on a day you don't want it on. What you do next depends on what you
want to happen to the work. There are five answers, and each one has its own
button. This article helps you pick the right one in a few seconds.
The word job in buttons follows your company's setting. If you chose
Work orders in Settings → Jobs, Cancel Job reads Cancel Work
Order, and so on.
Which one do I want?
| What you want | Use | What happens to the work |
|---|---|---|
| Do it on another day | Reschedule | The stop moves to the day you pick. Nothing is lost. |
| Keep the day, take it off this driver | Unassigned on the Board, or Reassign | The stop stays on the day with no driver, or with the driver you pick. |
| Don't do this visit at all, and don't bill for it | Skip this cycle | The visit is marked Skipped. The next regular visit comes on its usual day. |
| This visit should never have been booked | Cancel Job | The stop is cancelled. A recurring visit is not made again for that date. |
| The stop is in the past and nobody is going back | Dismiss in Needs attention | The stop is closed as Skipped with a reason. |
If the work was done and the stop was only left open in the app, don't skip or
dismiss it. Mark it done from Needs attention: see
Do it on another day: Reschedule
Use this for "the driver didn't finish Wednesday, move the rest to Thursday".
One stop
Several stops at once
By dragging
On Routes → Week, drag a stop from one day to another. You can also drag a
driver's whole day: see Week board and hand-offs.
"Move this visit": this visit only, or every week?
When the stop comes from a rate card and you move it to another weekday in the
same week, PortaPro asks Move this visit:
later visits move too.
Pick Just this visit for a one-time change.
Keep the day, take it off this driver
Use this for "take Five Star Builders off Antonio's route on Friday" when the
stop still has to happen that day.
from the driver's column to the Unassigned column. To move several, tick
them, choose Unassigned (or another driver) in Assign to… and click
Assign selected.
pick the other driver.
An unassigned stop stays on that day's Board until someone takes it.
Don't do this visit at all: Skip this cycle
Use this when a regular service visit should not happen this time: the site is
closed for the week, the customer asked you not to come, the units were
serviced early.
The visit is marked Skipped and kept as a record. There is no make-up
visit: the next regular visit is made on its usual day. A line billed per
visit or per pull is not charged for a skipped visit. A monthly or 28-day rate
stays the same.
Skip this cycle is only on stops PortaPro made from a rate card. A stop
you added by hand is cancelled instead.
Skipped stops are hidden on the Board. To see them, choose Cancelled in
the Status filter.
This visit should never have been booked: Cancel Job
For a stop from a rate card, cancelling works like skipping: that visit is not
made again, and the next one comes on its usual day.
Cancelling a delivery also cancels its pickup. For a short-term rental, use
Cancel rental in the rental's panel so the delivery, the pickup and every
service visit are cancelled together. There is no action to un-cancel a stop.
The stop is in the past: Dismiss
A stop left open on a past day is listed in Dispatch → Needs attention →
Missed stops. To close one nobody is going back for, open its menu, choose
Dismiss, and pick a reason. It is closed as Skipped, and the reason
shows on the stop.
Deliveries and pickups can't be dismissed, because they move equipment.
Reschedule or cancel those.
If the work was done and nobody closed the stop in the app, choose Mark
done in the same menu instead (or tick several stops and click Mark done
N). The stop is completed without a service report, and the customer is
not sent a completed notice.
Stop the visits for good
Taking one stop off one day does not change the schedule. To stop the visits
from coming back:
(customer → Sites → Rate card). See
(Pick up). Completing the pickup ends the line's billing and its visits.
See Extra service and pickups.
visits are made until it is Active again.
Why does one site have two stops on the same day?
PortaPro makes one stop for each line on a rate card. A site with two lines
that are both due the same day (for example, toilets and a handwash station,
each serviced weekly) gets two stops there that day.
To get one stop instead, turn on One stop per site per day in
Settings → Jobs → Stops per site (owners and admins). From then on, lines
at the same site that are due the same day share one stop: one report for the
driver and one completed notice for the customer. Stops already on the
schedule don't change.
Questions
I removed a stop and it came back. A rescheduled stop moves; it doesn't
come back. A stop from a rate card that you skip, cancel or delete is not made
again for that date, but next week's visit is still made on the usual day.
To stop every visit, change the rate card or pause the site.
Can a driver take a stop off their own day? No. A driver can report a
problem at a stop (Problem on the stop), which puts it in Needs
attention for the office.
Who can do this? Owners, admins and dispatchers.